Our design professionals have varied project experience with local, state, federal, and commercial customers. We have high degree marks in meeting schedules, managing project costs and exceeding customer satisfaction. Our projects have taken on all levels of developments, from simple metal buildings to day care facilities, to major office complexes. See example projects listed below:
MacDill AFB Tampa, Florida. On this project, Isaiah Engineering was a Sub-Consultant tasked to do Electrical Engineering for the design for Building 55, Building Alter 6 and new BRAC Building 6 for MacDill AFB. It occurred in a highly restricted area of CENTCOM occupied facilities. Our team performed and was successful in navigating the challenges of limited access and highly secretive areas. The project consisted of constructing a 31,439 SF new two-story facility, renovating altering 17,400 SF of existing Building 6 and renovating 12,000 SF of existing Building 55 which serves as a collateral group headquarters facility for active duty personnel. The completed facility accommodated the consolidated Squadron Operations, Aircraft Maintenance Unit and Life Support requirements for 16 KC-135 aircraft and to be jointly used by active duty and reserve personnel. This project required two-simultaneously designed projects but was advertised and awarded as one contract. Some of the project features were incorporation of ATFP. Measures prescribed by UFC 4-010-01, including design for the prevention of progressive collapse for multiple-story structures, designed to a LEED Silver level of certification. The renovations for Building Alter 6 and 55 consisted of upgrading and replacing walls, ceiling, lights, receptacles, parking lot lights, HVAC unit, VAV, exhaust fans, Power Panel, circuit breaker, communication system, public address system, mass notification systems, intrusion detection and security systems, audio visual technologies and components, extensive communication duct bank and underground power coordination. Environmental permitting (FL). Construction Cost: $16,575,000 ($14.2M Building 6 & $2.4M Building 55).
Friendship Missionary Baptist Church, Mobile, Alabama. Isaiah Engineering was a Sub-Consultant for this project and was responsible for the Electrical/Security Design and Construction Management. This project consisted of the scoping, programming and design of two facilities to support the educational and outreach ministries of the church. The first facility was a Life Center consisting of a gym (high school), elevated walkway, production theater, library, media room, large and small meeting rooms, spas, commercial kitchen, recreational room, weight room and reception areas. The total SF of this facility was 28,000. The second facility, a state-of-the-art Day Care is adjoined by a two-story glass atrium. This two-story facility includes twelve large classrooms, administrative offices and a large reception area. Outdoor playground areas were also provided for each 1st-floor classrooms. The total SF of this facility was 13,950. Designed “state-of-the-art” entry system with videos cameras in and around the facility. 2003 IBC standards were used for the design to meet City of Mobile requirements for the theatrical staging with elevated walkway. This project from beginning to design completion was done in less than six months. Shows the diversity and flexibility to adapt and quickly respond to unique design and delivery requirements of projects. Environmental permitting (AL) Construction Cost $2.5mil. for the daycare facility, park lot, and Life Center foundation and slab.
New Horizons Credit Union, Government St., Mobile, Alabama. Isaiah Engineering was a Sub-Consultant for this project and was responsible for the Facility condition assessment, Electrical/Security Design, and Construction Management. This New Horizon credit union project consisted of the renovation of the inside and outside of a warehouse/union hall building. This facility was changed to a credit union building. Through our facility condition assessment, we were able to recommend to the client ways to save in their budget and to minimize any problem that could have cost the project to be delayed. Through our assessment, the driveway was revised, and the parking lot was redesigned to provide a new covered pull-thru driveway for banking operations. The interior renovation was over 3000 SF. It consisted of new offices, restrooms, Teller area, wait area, conference room, break room, vault room also designed “state-of-the-art” entry system with videos cameras in and around the facility, new HVAC, VAV, lights, receptacles, switch, etc. Used 2003 IBC standards for the design to meet City of Mobile requirements. The main power panel was kept, just replaced circuit to accumulate the new circuit requirement. The exterior front was maintained except for the name change and the night deposit box. This project from beginning to design completion was done in less than four months. Shows the diversity and flexibility to adapt and quickly respond to unique design and delivery requirements of projects. Construction Cost $380,000.
The Board of Water and Sewer Commissioners of the City of Mobile, Alabama This project consisted of providing design services and renovating six lift stations. Isaiah Engineering served as Sub-Consultant for this project and provided all electrical design and was involved in the Instrumentation Control design. Our team responsibility was to replace and redesign the complete Electrical control circuits. That work consisted of sizing the starter for the motor of submersible pumps, designing control panel, single line diagrams, wet well junction box, area light, mounting rack, transformer, transfer switch, backup generator, RTU Panel, high/low-level switch, pressure probe, flow meter and backup natural gas pumps. Construction Cost: N/A
New Causeway Booster Pump Stations Spanish Fort, Alabama. Isaiah Engineering was a Sub-Consultant responsible for the electrical design and Instrumentation Control Design. The Electrical design was to provide complete new system that consisted of Main Disconnect Switch 600 Amp, 3P, 480Volt, non-fusible double throw switch, lighting arrestor, TVSS, low volume pump panel, north pump panel, south pump panel with power flex VFD Drives, 5KVA Transformer power panel, Dexter Fortson RTU Panel for (SFWS) and Bristol RTU Panel for (MAWSS) with RTU Antenna mounted on pole and area light fixture mounted on pole. Instrumentation included Flow meter with totalizer and low suction pressure switch. This project involved the construction of improvements to the water distribution system of the Spanish Fort Water System. Project services provided included conducting a survey of water distribution system and assessment of needed improvements. Cost estimating for the construction of proposed improvements was performed along with benefit analysis to obtain federal funding assistance. A water model was also developed for the system and proposed improvements were analyzed. Design plans were developed for the upsizing and relocation of approximately six miles of water transmission lines. Plans also included construction of a large water booster pump station. Project task included design an Advanced Metering Infrastructure system for installation. Construction services provided included preparations of contract specification and bidding documents and construction administration/inspection. Construction Cost: $5,200,000.00
The Board of Water and Sewer Commissioners of the City of Mobile, Alabama Isaiah Engineering was Sub-Consultant for this project and was tasked to provide all electrical design for the exterior lighting. One of the requirements for the exterior lighting was to prevent the light level on any adjacent roadway or residential property from exceeding 0.2-foot candle. Isaiah Engineering fulfilled these requirements by using a combination of LED wall pack lights mounted on the building and LED lights fixtures mounted on pole. Construction Cost: $15,000.00.
Board of Water and Sewer Commissioners of the City of Saraland, Alabama This project consisted of providing design services renovating existing meat market to office space and maintenance facility. Isaiah Engineering Sub-Consultant for this project provided all Electrical and Mechanical design. The project consisted of replacing and redesigning the complete Electrical and Mechanical systems. Some of the project features consisted of sizing the sub-panel, all interior, exterior LED Light fixtures including all power and communication outlets. Isaiah Engineering also provided Construction Inspection for the project. Construction Cost: $285,000.00